Model #358360180 Craftsman chainsaw, gas

  • Housing/chain/bar/handle
    3 Results
  • Cylinder/shield/crankshaft
    3 Results

Question and Answers

Q:

fuel line diameter for chainsaw model 358360180?

A:

Thank you for your question on the diameters of the fuel lines.

Most of the 2 cycle chainsaw fuel lines are 3/32 ID or 3/16 OD on the small line.

The large line is 1/8 ID and 1/4 inch OD.

I hope this information will help.

Fuel line kit large .

Fuel line small .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
July 23, 2012
Q:

I need a part for my chain saw and it is not on the parts list. My model # is 358360180 and the part is the chain ajuster screw

A:

Thank you for your question.

Your saw does not have the old style adjusting screw it is built into the bar. I have provided you with an image below showing how to adjust the chain on your saw. If someone has installed the old style bar onto the chain saw there is not any way to adjust the chain you would have to purchase a new bar. If you need to purchase a new bar you can do so by visiting our part website Sears Parts Direct . I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 23, 2011
Q:

part for my chain saw

A:

Thank you for your question.

I had originally answered you first question. I was looking at different modes and I found a model that is similar to yours that has the adjuster in the cover. The cover should work on your saw turning it into the older style. The model number I used was 358360131. The cover is part number 530053520 and can be ordered from our parts website Sears Parts Direct . The part might not be the same color as what you have but should work.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 24, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show