Model #358352160 Craftsman chainsaw, gas

  • Handle
    3 Results
  • Cylinder
    3 Results
  • Carburetor Kit 530-089703
    3 Results

Question and Answers

Q:

Fuel line diagram for Craftsman 358-352160

A:

Thank you for your question.

I am sorry; we do not have written instructions for the routing of the fuel lines on your product. Our technicians are thought the basic routing because the routing cannot change much from year to year. If you have one large fuel line and one smaller this eliminates some chance for error. If you have 2 small fuel lines to the carburetor connect them and start the engine. Reversing the fuel lines will not prevent the engine from starting. If you have them connected backwards, the engine will start and die. Reverse them and you will be correct.

The routing of the fuel lines vary from model to model. Keep in mind that the primer bulb circulates fuel from the tank, through the carburetor, and back into the fuel tank. One line goes from the fuel tank to the carburetor. One line goes from the fuel tank to the primer bulb, from the primer bulb to the carburetor, and back to the fuel tank. The small line in the fuel tank should have the filter attached to it. I have added a sketch below of how the fuel should flow in the circuit.

I have found a video I think will be useful. Please click here to watch a video on how the fuel lines are routed. If you need further assistance, please submit more details.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
August 28, 2011
Q:

My chain saw will only stay running when tilted to the left. It is a Sears model 358352160. What can be wrong?

A:

The fuel pick up is probably hung on something in the gas tank.

The fuel pick up is on the end of the fuel line inside the gas tank. It is weighted so that it falls into the bottom of the fuel tank when you turn the saw on its side or up.

Make a hook on the end of some clean wire and pull the fuel line with the fuel pick up on it out of the gas tank. Remove any kinks from the fuel line so the fuel pick up can go where it needs to go.

Read More
Jimmy K -
Sears Technician
November 12, 2009