Model #358350480 Craftsman chainsaw, gas

  • Chassis
    3 Results
  • Cylinder
    3 Results
  • Carburetor #530069722
    3 Results

Question and Answers

Q:

Automatic oiler does not work.

A:

Thank you for the question. Usually when an oilier does not work, I find the oil out let is plugged. I recommend dissembling the saw and make sure the outlet is clean. If you find that the outlet is clean, you have to replace the pump.

I have provided you with an image below to aid you in the repair. Start by removing the bar and the chain. Now behind the bar the shield has to be removed. I have boxed this part in blue in the image. Now you should be able to see the pump behind the shield. I recommend removing the sawdust from the outlet and see it the oil start to flow. You might have to run the engine to see if it is now working. If it is still not pumping oil, I recommend replacing the oil pump. I have marked the pump in the image below with the large red box and the location of the pump in the smaller red box. The part number for the oilier is 530071259.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage My Life.

Read More
Mark T -
Sears Technician
August 23, 2010
Q:

The starter spring on my craftsman chain saw popped out of place when installing a cord. The model is 358350480. Can you tell me how to reinstall the spring?

A:

Something had to break to cause the starter spring to pop out. The spring should have a loop or hook on each end. One hook fits into a groove inside the starter pulley and the other one fits over a post inside the cover.

These keep the spring from turning as the starter pulley turns and winds tension in the spring.

I hope this helps, I am sending you 2 images that might make it more clear.

Read More
Jimmy K -
Sears Technician
April 09, 2010
Q:

fuel line installation

A:

Thank you for your question.

I see that Maira E has given you a link to a previous answered question on fuel routing. The information in the link s id the same information I would have given. The manufactures do not provide fuel line diagrams because they are all basically the same. I know it can be confusing when you are not familiar with the fuel line routing. If you still have problems, you may consider having the saw repaired at one of our repair centers. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

If you have any other questions, please reply below with more details and I will get right back to you.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 05, 2010

Recommended maintenance parts & accessories

Show 3 more
No more item to show