Model #358350203 Craftsman chainsaw, gas

  • Cylinder/crankshaft/crankcase
    3 Results
  • Chain/bar/handle
    3 Results

Question and Answers

Q:

engine compression 358350203 Craftsman Chainsaw

A:

Thank you for your question and I understand your concern.

The minimum compression needed is 95 PSI and 25 PSI is too low. You may want to squirt a small amount of oil in the cylinder and check it again.  A standard auto compressing gauge will work fine providing you're not losing any compression past the spark plug threads.

Also, make sure the kill switch is in the off position and have the throttle wide open and the choke open.  Pull the engine over 5 times and note the compression and then spin it over another 5 times. 

 I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.


Read More
Joey S -
Sears Technician
August 22, 2013
Q:

Why can't I find a parts list for my chainsaw?

A:

You can see or print a parts diagram and list by going to www.sears.com. Select parts and enter your model number. You can look in the parts diagram and pick out the parts you need and use the item number in the parts list to price or order the parts.

Read More
Jimmy K -
Sears Technician
November 07, 2008
Q:

where can I find a diagram of the throttle cable routing for a chainsaw model # 358350203 as it has been sometime since it was taken apart

A:

Thank you for your question.

I have checked the saws we have here and I am sorry but we no longer have this saw on the shelf. I will try to explain the routing of the cable to you. In the handle, the housing of the cable should sit a notch and the end of the cable connects to the trigger. Before closing the handle, the spring should hold the safety release up and the trigger down. When the spring is correctly installed, you have to push the release before pulling the trigger. The other end of the cable should have a curved plastic part that it sits in then connects to the carburetor. I hope the explanation will help with installing the cable. If you would like you could add images below and I will try to explain better.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 24, 2011

Recommended maintenance parts & accessories

Show 3 more
No more item to show