Model #351217580 Craftsman planer

  • Base
    3 Results
  • Rollercase
    3 Results

Question and Answers

Q:

have a model 351-217580 thickness planer. The latch used to replace gibs and blades will not disenguage to allow cutter head to rotate what is the problem.

A:

Thank you for your question on the cutter auto-lock not releasing.

You have to put the cover back on to depress and hold the latch out of the way of the cutter head.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
October 11, 2012
Q:

chip clogging out feed roller board stops feeding 351217580 Craftsman 12 1/2" thickness planer

A:

The planer needs to be periodically cleaned and cleared of debris. Since you indicate that you have a chip clogging the the feed roller, I recommend that you disassemble the feed roller and thoroughly clean that area. Here is a link for the manual that will help you with that task: Owner's Manual.

Read More
Lyle W -
Sears Technician
November 19, 2013