Model #350 DLE (5ADM) Smith Corona typewriter

  • Jackets
    3 Results
  • Keyboard
    3 Results
  • Carrier Molding, Rails, And Frames
    3 Results
  • Carrier Drive
    3 Results
  • Element Drive
    3 Results
  • Ribbon Drive
    3 Results
  • Ribbon Cassette & Correction Cassette Mechanism
    3 Results
  • Hammer
    3 Results
  • Paper Feed
    3 Results
  • Transformer
    3 Results
  • Control Pc Board
    3 Results

Question and Answers

Q:

Manual for Electric Dryer (LG DLE 2301R)

A:

I emailed a PDF file of that dryer manual directly to you. If you still have trouble downloading the manual from that attachment, let me know.

Sorry for all of the trouble that you have been having in getting this manual.

Read More
Lyle W -
Sears Technician
March 30, 2011
Q:

LG Dryer model DLE 2532W not heating

A:

First, I recommend that you check the house circuit breakers or fuses for the dryer. Here is a brief video that discusses that issue: Video: Dryer Won't Heat . If the house breakers or fuses are okay, I recommend that you carefully check the voltage at the dryer outlet using a volt/ohm meter. The first image below shows the voltage that you should measure at the dryer outlet. NOTE: You should only conduct this check if you are completely confident in your technical ability to safely measure the live voltage at the outlet . Have an electrician or service technician conduct this test if necessary.

If the outlet voltage is okay, I recommend that you use the troubleshooting and diagnosis information in the second image. The third image shows access in formation for components in the dryer. Be sure that you unplug the dryer before accessing internal components. NOTE: This information is intended for technicians. Do not conduct any tests that you are not completely comfortable with. These tips may help you diagnose and repair this dryer failure. If you need more assistance, reply with additional details based on the information provided below.

You can order parts from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 01, 2011
Q:

Why won't my oven heat above 350 degrees?

A:

You did not indicate if the broiler element will come on and heat or not when the oven is cold. The broil element and bake element are both used and cycled on an off during the bake mode. I added some theory of oven operation in the image below.

Based on your symptom the likely failure could be a bad bake or broil element since both are used during the bake mode. See image below. It's not likely a control failure or temperature sensor. You can disconnect and test the oven sensor probe and the bake and broil elements using an ohm meter. When the oven sensor is at room temperature the resistance of oven temperature sensor should measure 15 ohms at 75 degrees. The broil element should measure 17 ohms and the bake element should measure 22 ohms. You should be able to diagnose the failure with the information given. NOTE: Disconnect the power supply to the range before disconnecting and testing the broil and bake elements.

Read More
Joey S -
Sears Technician
October 12, 2009