Model #345 Wagner airless paint sprayer

  • Power Painter
    3 Results

Question and Answers

Q:

Husqvarna 345 Chainsaw

A:

Thank you for the question.

I am sorry you are having a problem with the chainsaw. I recommend removing the air filter first. Then watch the linage on the carburetor. If you cannot see the linkage on the carburetor with the air filter removed I recommend taking the saw in for service. The reason I recommend taking it in for service is because we to not have the service manuals to guide you if you run into problems. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 06, 2011
Q:

How can we correct the control on our Kenmore dual fuel range?

A:

Temperature in the oven is detected by a resistance temperature sensor probe. This temperature sensor probe is located at the top of the oven. As soon as the set temperature is detected by the control that monitors the resistance through this temperature sensor probe, the tone will sound that indicates the oven is preheated. Since the oven has not been heating for very long, the temperatures throughout the oven may not be equalized. For most items being baked in the oven, it will normally be safe to place them into the oven as soon as the preheat cycle ends. If you have more sensitive cookies or cakes, I recommend waiting an extra 10 minutes after the preheat cycle ends before you place these items in the oven to give it more time to cycle and equalize temperatures.

The method that a technician uses to check the actual temperature in the oven is to allow the oven to cycle on and off several times before an average temperature is measured with an accurate thermocouple thermometer. Since you are measuring the set temperature of 400 degrees 7 minutes after the pre-heat cycle ends, it is likely that your oven temperature control system is working accurately.

Based on your description, I do not recommend making any adjustments on the oven controls. Since the oven has a hidden bake element, it will normally take slightly longer to equalize and maintain temperatures in the oven. As noted above, I recommend giving the oven the extra time to preheat if you are baking extremely sensitive items if necessary.

If you have more questions regarding the performance of this oven, resubmit your question with additional details and we will be glad to help you further.

Read More
Lyle W -
Sears Technician
April 10, 2009
Q:

oven temperature

A:

That type of temperature variation is probably normal. To measure the actual temperature in the oven, you will need to follow this procedure:

  1. Set the oven to bake at 400 degrees.
  2. Allow the oven to heat for 30 minutes. The oven will have time to fully preheat and then cycle the bake element on and off several times after preheating.
  3. Measure the oven temperature once a minute for a 10 minute period.
  4. Find the average oven temperature during that 10 minute period.
This procedure will give you a good indication of the actual temperature in the oven cavity. You can compare that average temperature to the set temperature. If the temperature needs to be adjusted slightly, then you can use the procedure shown on page 21 of the manual that Anna T. posted in the above response.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 15, 2013