Model #340 Porter Cable sander

  • Finishing Sander
    3 Results

Question and Answers

Q:

Oven will not preheat 790.97479800

A:

Thank you for your question and I understand your concern.

Based on your symptom and details I suspect that one of the two oven elements (Bake and Broil) is not heating. Even though you did not program broil, the broil element will alternate with bake element. The convection element should also operate during pre-heat.

If one of the elements is not heating, and the element is Okay, I suspect a faulty electronic oven control/clock assembly. The bake, broil and the convection element can be access from the rear and tested for continuity with an Ohm meter. NOTE: Disconnect the power cord from the power source before removing the rear panels. Be sure to disconnect the wires from the heating element before testing the element for continuity. If all three elements are Okay, replacing the electronic oven control/clock assembly will likely resolve the problem.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
November 12, 2012
Q:

My Weider platinum XP800, weight won't adjust. the panel works, and is calibrated but the weight only maxes out.

A:

This problem is usually caused by a broken wire in the weight mechanism of the weight trainer. It requires the wires and switches be checked with an ohm meter for continuity.

I am sending you an image of the wiring schematic for the weight trainer. If you need further help when checking the circuits send another email and give us the details and we will get you the information.

Read More
Jimmy K -
Sears Technician
Q:

need repair manual for riding mower

A:

Thank you for your question.

I know how important it is to have the manual. I searched for a complete copy of the manual. I was not able to find a manual for your exact model. I was able to find a manual I think is very close to your. Please click here to load the manual once the manual loads you can save a copy to your computer and/or print out a copy.

I hope this is helpful. If you need further assistance please feel free to reply below with more details.

Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
November 11, 2012
A:

Thank you for your question.

I know how important it is to have the manual. I searched for a complete copy of the manual. I was not able to find a manual for your exact model. I was able to find a manual I think is very close to your. Please click here to load the manual once the manual loads you can save a copy to your computer and/or print out a copy.

I hope this is helpful. If you need further assistance please feel free to reply below with more details.

Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
November 11, 2012
See more answers