Model #33-1027-00-01 TAPPAN ranges, electric

  • 3 Results
  • Door Parts
    3 Results
  • Broiler Parts
    3 Results
  • Control Panel
    3 Results
  • Body Parts
    3 Results
  • Cooktop Parts
    3 Results

Question and Answers

Q:

You did not answer my question. Go to the page and tell me which manual I use. Is it 00 or 01?

A:

I apologize for being clear. Use the manual or the 01 model.

Read More
Jimmy K -
Sears Technician
April 25, 2008
Q:

Interpreting Error codes on Bosch Washer WFMC2100UC/01 Bosch Washer WFMC2100UC/01

A:

The D:08 indicates that the motor speed sensor (tachometer) failed. The D:10 indicates that the power limiter switch tripped due to the motor being overloaded or binding up. The C:01 indicates that the codes were encountered the previous cycle in the last 16 washes. 

I recommend that you unplug the washer and check the drive system again for binding. You indicated that the drum spins freely by hand (I assume with the drive belt attached to the motor). With the belt disconnected, the spin basket should spin even easier. Check for any binding or noise in the spin basket with the belt detached. The basket may not be spinning easily with a load of wet clothes in the basket.

If you find no problems in the drive system, then you may need to replace the motor.

I hope that this information helps. If you need further assistance, let us know.

 

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 12, 2015
Q:

33 GALLON AIR COMPRESSOR

A:

I suspect the rubber pieces got into the compressor while it was stored in a warehouse.

If the compressor is running and building pressure, blow the rubber particles out and use the compressor.

If you don't feel comfortable doing this schedule service and let a technician check the compressor before removing the rubber pieces.

Read More
Jimmy K -
Sears Technician
June 15, 2010