Model #33 Hoover vacuum, upright

  • Agitator
    3 Results
  • Cleaningtools
    3 Results
  • Handle
    3 Results
  • Hose
    3 Results
  • Mainbody
    3 Results
  • Motor Assembly, Hood
    3 Results
  • Outerbag
    3 Results

Question and Answers

Q:

33 GALLON AIR COMPRESSOR

A:

I suspect the rubber pieces got into the compressor while it was stored in a warehouse.

If the compressor is running and building pressure, blow the rubber particles out and use the compressor.

If you don't feel comfortable doing this schedule service and let a technician check the compressor before removing the rubber pieces.

Read More
Jimmy K -
Sears Technician
June 15, 2010
Q:

Craftsman 33 gal. Air compressor:

A:

The pressure switch controls the cut-in and cut-out pressures for the tank. The cut-out pressure setting of the tank is 150 psi. Reading 156 psi on the tank pressure gauge is not out of a normal range of accuracy for the pressure switch. Shut off the compressor and bleed some air out of the tank so that it is less than 120 psi (the cut-in pressure). Start the compressor and see if the pressure switch cuts out when the tank gauge reads approximately 150 psi. If it does then the pressure switch is working normally. The tank is designed to hold significantly more pressure than 150 psi. A safety valve will open to release pressure and protect the tank when pressure reaches near 200 psi.

Read More
Lyle W -
Sears Technician
May 19, 2010
Q:

Crafstman 33" wide area mower

A:

Thank you for your question.

I will be happy to assist you. I looked up the wide mower. It looks like we have sold a few different models of this mower. Most of them the brakes are engaged when the handles are released. If you would like to reply below with the model number and more details, I will double check your model.

Thank you for using Manage My Life!

Mark T.

Read More
Mark T -
Sears Technician
October 03, 2012
A:

barry,

Thank you for adding the model number. I looked up you models. The brakes on these models should be on when the handle is released. When you pull the handle down it tightens the belt and releases the brake lever.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life! Mark T.

Read More
Mark T -
Sears Technician
October 04, 2012
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show