Model #32755-BELT SANDER Craftsman sander

  • Frame Assembly
    3 Results

Question and Answers

Q:

drive belt

A:

Thank you for your question on the drive belt.

I am going to need a little more information to be able to help you.

Please reply with the model number of the product and a product description and I will be happy to help you.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
May 18, 2012
Q:

drive belt

A:

Thank you for your question on the drive belt.

I am going to need a little more information to be able to help you.

Please reply with the model number of the product and a product description and I will be happy to help you.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
May 18, 2012
Q:

Belt sander drive wheel comes off

A:

Thank you for your question on the sander.

It sounds like the rubber has come loose from the roller and will have to be replaced.

That is a factory installed rubber that is vulcanized onto the roller.

The replacement part number for the rear drive roller is: 998391-001 for about $13.00.

Rear roller .

I hope this information will help you.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
September 01, 2011
A:

Thank you for the update. This is probably a snap ring that is just before the drive pulley. If you do not have a snap ring pliers you can use a couple of small flat blade screwdrivers to pry open and slide out of the groove on the shaft. I hope this will help. Sam A.

Read More
Sam A -
Sears Technician
September 02, 2011
See more answers