Model #32-1272-57-04 FRIGIDAIRE Free Standing, Gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results
Find part by diagram >

Question and Answers

Q:

917,377130 part 57 bag frames comes in two parts

A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

I am sorry that was not helpful. I checked the instructions posted in the manual. I posted the instructions for you model below. Click on the image to enlarge it. If your model differs, please reply below. If you could include a picture of the bagger and frame it would be helpful.

Read More
Mark T -
Sears Technician
September 19, 2011
See more answers
Q:

Any one with the same problem with samsung washing machine WF448AAP/XAA 04

A:

I researched that part. The bottom portion of that dispenser housing is only available as a complete dispenser housing assembly (part DC97-14522A). Here is a direct link for that part: Dispenser Housing for Samsung Washer WF448AAP/XAA 04 .

Read More
Lyle W -
Sears Technician
March 24, 2012
A:

Let us know if that part fits properly if you get the chance. Let us know if you need more help.

Read More
Lyle W -
Sears Technician
March 26, 2012
See more answers
Q:

Manual help...How do I install a lever for my Craftsman 247-884551 snowblower? The manual has a pick, but doesn't show close up of where it goes. Thank you.

A:

Thank you for your question.

I have checked our manual and was not able to find an image of how the spring fits into the housing. I will do the best I can to explain how to install the spring. To install the spring the housing has to be taken apart and the spring is used to hold the lever in the selected gear. It should fit between the lever and the housing. You should see wear marks where the old spring was.

I hope this is helpful.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 11, 2011