Model #32-1272-23-09 FRIGIDAIRE Free Standing, Gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results
Find part by diagram >

Question and Answers

Q:

Why does my TV shutdown?

A:

As a TV ages, the tube can become weak. A technician can try turning up the screen control to see if it will stop the TV from shutting down with a 5 blink error. This control is usually found on the flyback transformer which can be dangerous since this is the transformer that generates the high voltage for the CRT. A 6 blink error code could mean something else but since you are getting the TV on for 2-3 seconds I would start off making checks on the screen control. Eventually a new tube will be needed but you might get some life out of it if there is nothing damaged.

Read More
David A. - Personal Solutions Manager -
Sears Technician
November 11, 2009
Q:

Door hinge has locked when it was removed for cleaning. How do I unlock it to replace the door. It is a Kennmore Electric range four years old.

A:

Try to disable that oven door lock using the procedure shown in the first image below. Here is a link for the full owner's manual for your range in case you need it: Owner's Manual .

If you are not able to unlock the oven door using that procedure, then you may be able to unlock it manually be unplugging the range and accessing the door lock motor assembly on the back of the unit. Remove the back panel to access that oven door lock motor assembly. It is shown in the second image. You may be able to release the rod on the top of that motor assembly and manually unlock the oven door.

You could have a bad door lock motor assembly, a wiring failure or a problem with the electronic clock control board that is preventing the oven door from unlocking. If you need help diagnosing and repairing that type of failure, reply with additional details and the full model number of your range. The model number is normally on the base of the range in front of the left or right front leveling leg. Open the bottom drawer below the oven door to view this area.

If needed, you can order parts from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 24, 2011
Q:

The power does not come on my Protron TV.. The cord is good and the tv is only 3 years old.

A:

Unplug the set and plug it back in, hit the power button a few times and repeat. Since you don't mention a power surge or the losing power then it could be a failure in the TV itself. This TV has a power supply board that is in charge of converting your AC into DC and distributing it to where it needs to go. My first guess would be that some filter capacitors have gone bad and the voltage is slightly off. That is why attempting to turn it on multiple times can get it on. This is not a fix but an indicator that you are on the right track. Find a local shop and see if they are willing to take a look inside for you. A lot of the times, the caps are visible swollen and can be replaced to get it working again. If the technician cannot see anything wrong visibly then it becomes a challenge to find what is missing since there is little service information on these sets.

Read More
David A. - Personal Solutions Manager -
Sears Technician
June 02, 2010