Model #32-1042-57-13 FRIGIDAIRE free standing, gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results

Question and Answers

Q:

What does error 13 mean?

A:

The E: 13 is a drain pump issue (drain pump time exceeded). It may be a faulty drain pump, bad wiring, or a clogged drain hose.

I have included a set of illustrated instructions (See below). These should step you through the process of examining the drain pump and its components.

This is a very labor intensive do it yourself project, if you are not completely confident in your repair skills, I recommend calling a service company to diagnose and repair your appliance.

If you need more assistance please resubmit question with more details. I will be looking forward to helping you again in the near future.

Note: Our imaging system is malfunctioning. I would like to apologize in advance if the attachments do not appear online.

Read More
Landell -
Sears Technician
December 28, 2009
Q:

917,377130 part 57 bag frames comes in two parts

A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

Thank you for your question.

There are two types of bags. The first has a pocket that the back section of the frame threads. To install this style you have to thread the back section through the pocket. Then bunch up the bag so the ends of the frame are sticking out on each side. Now take the front part of the frame and slip it on to the back part of the frame. Most of the time, these will not line up because one of them is bent. If this is the case, flex the back section to match the front. Once you have them joined, work the bag into position along each side. Then work the vinyl binding over the frame opening.

The second style does not have the pocket. This style you have to slip both parts of the frame together first. Again, you might have to flex the parts to get then to fit. Once it is together put the bag over the frame and secure with the vinyl bindings.

I hope this is helpful. If you need further assistance, please reply below.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 19, 2011
A:

I am sorry that was not helpful. I checked the instructions posted in the manual. I posted the instructions for you model below. Click on the image to enlarge it. If your model differs, please reply below. If you could include a picture of the bagger and frame it would be helpful.

Read More
Mark T -
Sears Technician
September 19, 2011
See more answers
Q:

Is there a tool used to change oil on 247.88780 snowblower?

A:

Thank you for your question.

 

I am sorry you are having a problem with changing the oil in the snow blower. The drain plug on the engine should have a 10 MM head on it. It requires you to use a 10 MM wrench or socket to remove it. You can purchase the wrench from your local Sears store. The image below has the instructions for draining the oil.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
November 06, 2013