Model #32-1039-00-07 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Door Parts
    3 Results
  • Burner Parts
    3 Results
  • Body Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Dyson DC 07 vacuum

A:

Thank you for your request for the handle release.

There has been an update to this part from Dyson

You will need to order either 908821-01 if a clutched drive assembly or 908822-01 for a clutch less model.

You can order this part from: Sears Parts Direct .

Lock .

I hope this will help.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 18, 2011
Q:

Thermador PD304BS/07 won't bake above 350

A:

Thank you for your question and I understand your concern.

The first thing to check and confirm is to make sure the bake and broil elements operate. If the bake and broil elements will heat, then it could have a faulty temperature sensor or an intermittent oven control board operation.

I strongly suggest calling a service technician to diagnose and repair your range. You can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
September 04, 2012
Q:

The power does not come on my Protron TV.. The cord is good and the tv is only 3 years old.

A:

Unplug the set and plug it back in, hit the power button a few times and repeat. Since you don't mention a power surge or the losing power then it could be a failure in the TV itself. This TV has a power supply board that is in charge of converting your AC into DC and distributing it to where it needs to go. My first guess would be that some filter capacitors have gone bad and the voltage is slightly off. That is why attempting to turn it on multiple times can get it on. This is not a fix but an indicator that you are on the right track. Find a local shop and see if they are willing to take a look inside for you. A lot of the times, the caps are visible swollen and can be replaced to get it working again. If the technician cannot see anything wrong visibly then it becomes a challenge to find what is missing since there is little service information on these sets.

Read More
David A. - Personal Solutions Manager -
Sears Technician
June 02, 2010