Model #32-1019-00-06 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Body Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Why would my whole house air cleaner not come on?

A:

Make sure that the access cover is closed. The air cleaner has an interlock switch that will prevent it from powering up if this cover is open.

I recommend that you shut off the circuit breaker and check the wiring and installation. I emailed you a PDF file with the installation instructions and other technical data in case you need it. NOTE: Some of this information is intended for technicians. Exercise caution when using this data. Follow electrical safety guidelines. Disconnect electrical power before accessing internal components.

The document that I sent you has a troubleshooting flow chart that may help you determine the cause of this failure.

If you need parts, you can order them from the Sears PartsDirect website.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
December 15, 2010
Q:

Snow blade for '06 DYT4000?

A:

Thank you for your question.

I will be happy to assist you. I searched through our fit up books. The only model snow blade I show for your tractor is model 486.24441. The models you listed for older tractors with different frames.

I hope this is helpful. Please let me know if you need further assistance on the air compressor.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 06, 2012
Q:

what does f 32 mean on model number 461970235742

A:

The number you provided as a model number is NOT a model number. Without having the model number I will only be able to provide general information. The "F-32" fault code indicates a water level pressure switch failure. The water level pressure switch will likely need to be removed and replaced. The water level pressure switch is located underneath the top and mounted on the right hand side. NOTE: Disconnect the power cord from the power source before removing the top.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 11, 2010