Model #32-1012-45-11 FRIGIDAIRE Free Standing, Gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results

Question and Answers

Q:

What is wrong when the igniter will glow for 10-12 seconds and then go off with out lighting gas?

A:

The most likely problem is weak solenoid coils on the gas valve assembly. There is always a chance that it's a failed gas valve assembly too. Key# 10 in the image is the gas valve assembly and key# 13 and 14 are the coils. It's recommended to replace both at the same time. I recommend ordering the coil kit which will include both coils. The part number for the coil kit is 279834.

I recommend calling a service technician to diagnose and repair your dryer.

Read More
Joey S -
Sears Technician
April 17, 2008
Q:

GTV-16 belt #108429x

A:

Thank you for your question.

I double checked the dimensions of the belt. According to our belt chart the dimensions are correct. I posted an image below of the chart. I highlighted your belt. Click on the image to enlarge it.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
August 29, 2012
Q:

what does f 32 mean on model number 461970235742

A:

The number you provided as a model number is NOT a model number. Without having the model number I will only be able to provide general information. The "F-32" fault code indicates a water level pressure switch failure. The water level pressure switch will likely need to be removed and replaced. The water level pressure switch is located underneath the top and mounted on the right hand side. NOTE: Disconnect the power cord from the power source before removing the top.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 11, 2010