Model #32-1002-66-10 FRIGIDAIRE Free Standing, Gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results
Find part by diagram >

Question and Answers

Q:

Are there horizantal and vertical hold controls on a 10 yr old 32" Sanyo TV? And if so, where?

A:

A TV made around 2000 would most likely not have a vertical hold adjustment since the need for this adjustment has been eliminated by technology. Vertical hold problems are generally described as the image rolling. Horizontal lines (going left to right) and vertical shaking (top to bottom) is a more common symptom of the vertical deflection collapsing. The fact that you hit it on the side to correct it makes me suspect that you have a poor solder connection in this circuit. The exact location and IC will depend on the model but I would look for an IC501 labeled LA7841 and see if there are any ringcracks around the solder joints. Take extreme caution when working on your TV, The tube will hold a harmful charge long after the power has been disconnected. If you cannot identify the flyback and anode lead as well as capacitors visually I would avoid inspecting your board.

I may have misinterpreted your symptom and if you need to ask the question again try to get your model number so I can be more specific.

I may have misinterpreted your symptom and if you need to ask the question again try to get your model number so I can be more specific.

Read More
David A. - Personal Solutions Manager -
Sears Technician
November 03, 2009
Q:

How can I obtain an owners manual for a Craftsman 10/32 snowblower with tracks?

A:

Thank you for your question.

 

I am sorry you are having a problem with finding the manual. I checked our site for the manual but we no longer have a copy of the manual for your model. I looked up other models and found a manual close to yours. Click here to load that manual. The instructions in the manual should match your snow blower. Just make sure to use your model number to order parts. Do not use the part numbers listed in the manual. They may not fit. If the track is catching, I recommend checking the tension of the track first. If it is not tight enough it might rub. The instructions for adjusting the track are located on page 24.   

If you need parts for the snow blower, you can order them from the following link.Replacement parts for a Craftsman snow blower model 356.885000.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

Mark T.

Read More
Mark T -
Sears Technician
November 07, 2013
Q:

remington22lr model 66

A:

I see that Marc posted a link in the above response for the page on the Remington website that has the Owner's Manual links. That should help you find the manual for the Remington Model 66 rifle.

Read More
Lyle W -
Sears Technician
December 26, 2012