Model #32-1002-45-12 Frigidaire free standing, gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results

Question and Answers

Q:

what to do? thermostat for freezer remain at 15 degrees and refrigerator at 12. recommended is 0 degrees and 32. Kenmore elite 10644433601

A:

If you have to set the controls to 15 degrees in the freezer and 12 degrees in the refrigerator to get normal temperatures inside, either the control board or the sensors have failed.

You should call 1-800-469-4663 or go to www.searshomeservices.com and schedule service for a Sears technician to diagnose and repair the problem.

Read More
Jimmy K -
Sears Technician
July 12, 2010
Q:

Fixed Router to Plunge Router

A:

Thank you for your question.

I can understand wanting to make use or your Router in other applications.

The plunge base for this Porter Cable Router is stock # 6931

You can call the number listed below to purchase this plunge base for your router.

1-800-223-7278.

I hope this will help with you finding the plunge base for your router.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 15, 2011
Q:

what does f 32 mean on model number 461970235742

A:

The number you provided as a model number is NOT a model number. Without having the model number I will only be able to provide general information. The "F-32" fault code indicates a water level pressure switch failure. The water level pressure switch will likely need to be removed and replaced. The water level pressure switch is located underneath the top and mounted on the right hand side. NOTE: Disconnect the power cord from the power source before removing the top.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 11, 2010