Model #32-1002-45-05 Frigidaire free standing, gas

  • Cover
    3 Results
  • Backguard
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Body Parts
    3 Results
  • Control Panel
    3 Results

Question and Answers

Q:

what does code f 05 mean

A:

The "F05" fault code indicates a Water Temperature Sensor Error. If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, the "F05" error code will be displayed. See image below for further instructions.

Potential Causes:

  1. Check the Water Temperature Sensor resistance. It should measure 9.7K ohms at 86 degrees.
  2. Check connections to the Water Temperature Sensor
You will likely find the wire connection had come loose from the temperature sensor. Without having the model number of your HE3t washer I will not be able to confirm if the heater and sensor is located at the lower backside of the tub or at the front lower section of the tub. Disconnect the power cord from the power source before removing the front lower access panel and checking for loose connections on the temperature sensor.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 04, 2010
Q:

Fixed Router to Plunge Router

A:

Thank you for your question.

I can understand wanting to make use or your Router in other applications.

The plunge base for this Porter Cable Router is stock # 6931

You can call the number listed below to purchase this plunge base for your router.

1-800-223-7278.

I hope this will help with you finding the plunge base for your router.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
June 15, 2011
Q:

what does f 32 mean on model number 461970235742

A:

The number you provided as a model number is NOT a model number. Without having the model number I will only be able to provide general information. The "F-32" fault code indicates a water level pressure switch failure. The water level pressure switch will likely need to be removed and replaced. The water level pressure switch is located underneath the top and mounted on the right hand side. NOTE: Disconnect the power cord from the power source before removing the top.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
August 11, 2010