Model #32017562 Craftsman drill driver

  • Drill
    3 Results

Question and Answers

Q:

angle driver don't work 32017562 Craftsman Drill

A:

Thank you for your question and I understand your concern.
 
If the work light works when the trigger is pulled, then I must assume the slide switch ON and not Locked/OFF. If the green LED is lit on the Fuel Gauge, and the slide switch is not on OFF and the drill will not operate in forward or reverse, then it could have a faulty trigger switch, or motor. I would take it apart and look for a disconnected wire or bad connection between the battery, trigger and motor. If it's less than a year old, take it back to the store.

Read More
Joey S -
Sears Technician
June 02, 2014