Model #320 WAGNER Airless Paint Sprayer

  • Power Painter/accessories
    3 Results
Find part by diagram >

Question and Answers

Q:

ryobi blower\vac. problems

A:

Thank you for your question as to why the Ryobi blower/vac will not start.

I am sorry that your Ryobi blower will not start.

There are a number of things you will need to check.

First do you have fresh fuel mixture in the fuel tank and purged it through the carburetor by pushing the primer bulb several times.

Please check to see if the fuel lines are not broken or cracked.

It is possible that the carburetor is not supplying fuel to the engine.

Next have you changed the spark plug out? These small engines are known for collecting carbon on the spark plug.

Please let me know what you find out and we can continue to troubleshoot with that information.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
April 20, 2012
Q:

what the electronic board is called on a craftsman router

A:

Thank you for your question on the electronic control board in the Craftsman router model number 320.17541.

The part description calls the electronic control the PCB Plate.

Please click on the link below to get the parts ordering information. Electronic control board or router model 320.17541 .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
December 11, 2012
Q:

Nextec 320 10003 Drill/Driver Gears skipping 320 10003

A:

Thank you for your question and I understand your concern.

It would be difficult for me to say but you could remove the clutch assembly and get back down to motor output shaft/gear box on the gear case and grip it with a pair of pliers and then run the drill and see if it skips and makes the stripping sound. If it does, then I would have to suspect gear case assembly will need to be replaced because it is not serviceable.

The gear case assembly part #2790153000 for drill model 320.10003 can be ordered from Searspartsdirect.com

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post. 

Read More
Joey S -
Sears Technician
July 17, 2013