Model #31Q507-0010-H1 Briggs & Stratton engine

  • Cylinder/gasket-sets/sump
    3 Results
  • Head-cylinder/motor-starter
    3 Results
  • Carburetor/blower Housing
    3 Results

Question and Answers

Q:

Repair "simmer burner" switch on Kenmore Range model 790.94212409 79094212409 Kenmore Electric range

A:

Thank you for your qeustion and I understand your concern.

Based on the details provided, you have the switches connected correctly. Based on your details, the simmer select control board is faulty and will need to be replaced. The simmer select control board is part #316429301 which can be ordered from Sears PartsDirect.

I hope this helpful. If you need any further assistance let us know.

Thank you.

Read More
Joey S -
Sears Technician
February 13, 2014
Q:

Cooktop 790.41202903 switch replacement

A:

Thank you for your question and I understand your concern.

I added the wiring diagram in the image below. According to the wiring diagram; the right front (RF) burner wires are BROWN wires. They would connect to terminals H1 and H2 on the right front burner switch.

The left rear (LR) burner wires are Yellow wires and they would connect to H1 and H2 on the left rear burner switch.

The red wire connects to each of the L2 terminals. The letter (L) indicates line voltage and the letter (H) indicates heater (element).

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
May 08, 2012
Q:

Kenmore Infinity Switch Hookups

A:

You are correct about the connections on the right rear burner switch. The P will be connected to the 2-P. The H1 wire will be connected to the 1-H1, etc. The locations of those terminals on the new switch are in different locations but the terminals are labeled the same on the 2nd switch except for the additional number in front.

The part number that you have for the right front burner switch does not appear to be correct. You indicate that you have part 316049800. My records indicate that you should be using part number 316238200 for that right front burner switch. That part number 316238200 switch should have the same designations as the original switch (P1, P2, 2, 4 and 4a). I recommend that you exchange or return that part 316049800. It does not appear to be the correct burner switch for that right front burner.

You can order that burner switch part 316238200 from this page: Right Front Burner Switch for Kenmore Range Model 790.92680302 .

I hope that this information helps. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician replace those burner switches, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 03, 2012
A:

Dan: Based on the image of the new switch, it looks like you do not have the correct switch. If you would provide the complete model number of your range I can then check for the proper part number for the left front burner switch.

Read More
Joey S -
Sears Technician
July 26, 2013
A:

Dan: It seems you have the wrong switch according to the parts image at Searspartsdirect. This would expain the extra terminals. Key#54B should be part #316049800.

Read More
Joey S -
Sears Technician
July 29, 2013
See more answers