Model #31H777-0831-E2 Briggs & Stratton engine

  • Head-cylinder/dipstick/sump
    3 Results
  • Carburetor/starter Motor
    3 Results

Question and Answers

Q:

E2:P2

A:

I don't see the E2:P2 listed in the technical data for the console in the calibration mode. The console will display EP:2P to indicate that the internal test passed in the calibration mode. This may be what you observed. Since the display did not show EF:2F then the test passed if you did see the EP:2P. The only error code that I see for this treadmill is the E6 that will be displayed on power up if the self test failed during calibration. I provided all of the technical data that I have for this treadmill in the images below. Since you replaced the motor, I assume that you should be able to safely use this information to test and diagnose your motor problem. NOTE: This information is intended for technicians. Follow electrical safety procedures when using this data. Unplug the treadmill when accessing internal components. When you do need to plug the treadmill in for brief tests with internal components exposed, avoid making contact with exposed wires and contacts.

If you need more help, submit additional details and we will try to assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 24, 2010
Q:

Lawn Tractor #917.273392 18 hp Briggs # 31H777. Purchased a Briggs shop manual. Which engin model number in the Briggs manual is my engine? 31H777 is not there.

A:

For most stuff any Briggs and Stratton 31series engine will use the same torque specs across the board. The only one that has some substantial differences is the 31C engine. Any 31H or 31P engine should match up for torque specs.

If you need anything specific you can submit back with which torque specs you’re unsure of and I can dig them up for you.

Thank you for using Manage My Life!

Read More
Lyle W -
Sears Technician
August 19, 2010
Q:

What does "E2" error code indicate?

A:

Without knowing the model number of your Kenmore range I will not be able to provide any specific information. Generally speaking the failure is likely a failed oven control board.

I recommend resubmitting your question with the model number and the fault code for model specific information.

Read More
Joey S -
Sears Technician
April 29, 2009