Model #31FA-2XS-ON Magic Chef range (gas)

  • Control Panel
    3 Results
  • Body
    3 Results
  • Gas Controls
    3 Results
  • Door
    3 Results

Question and Answers


How do I reset oven and get it out of cleaning mode, with no electricity


Your details indicate that the fuse blows as soon as the range is plugged in. This means that you probably have a short circuit in the wiring, the control board or a component. In that situation, you will not be able to power up the control board long enough to cancel the cleaning mode. I recommend that you leave the range unplugged and have a service technician examine it. The service technician should be able to locate the short circuit and repair the problem. You can schedule service through this link: Sears Home Services Range Repair.


If you want to repair this problem yourself, I recommend that you leave the range unplugged and remove the back panel behind the console. Note: Metal edges on that back panel are sharp. Protective gloves are recommended during that process. Check the wiring connections on the electronic clock control board in the console. Look for a burnt spot or apparent damage on the control board and the wiring. If that control board is obviously damaged, then it will need to be replaced. You can order parts from this page: Kenmore Range Model 790.78618505 Repair Parts.  Be sure that the range remains unplugged when accessing and replacing internal components.


If you need more help, reply with additional details and we will assist you further. 

Read More
Lyle W -
Sears Technician
March 26, 2013