Model #31A-250-800 Mtd snowthrower, gas

  • Fuel Tank/auger
    3 Results
  • Chute/handle/shroud
    3 Results

Question and Answers

Q:

My oven does not go pass 250

A:

Thank you for your question and I understand your concern.

In order to provide any model specific information, I will need to know the model number of your range or wall oven.

Based on your symptom, if this is a gas range, the failure could be the glow bar bake igniter. If it's an electric range, it could have a faulty electronic oven control.

So that’s what I can tell you at this point. I can give you more detailed help if you could provide me with the complete model number. The model numbers are typically located on the oven frame somewhere around the oven cavity opening or it could be on the oven frame behind the broiler or storage drawer. If you could supply me with that information I will be happy to assist you further. 

Read More
Joey S -
Sears Technician
November 09, 2013
Q:

Kenmore ultrasoft 250 water softner

A:

Thank you for your feed back on the water softener control plug.

I am sorry that you had gotten it reversed and that is a good comment about making the wire harness plug only going on one way.

Thank you for your comments and I am glad that you got the water softener showing water flow again.

Sam A.

Read More
Sam A -
Sears Technician
August 15, 2012
Q:

What does Err 1 indicate on my Kenmore Ultrasoft 250 water softener?

A:

The Err 1 is indicating a likely inoperative motor, loose or bad wire harness connection to switch, failed position switch or face plate. See image below.

I added a link below to Kenmorewater.com with an excellent trouble shooting animation and operational animation that will walk you through diagnostics and repairs. Click on "Troubleshooting" to open the link. Press Systems and the press "Error Code Indication".

Read More
Joey S -
Sears Technician
April 29, 2009