Model #31FY-92KXS-CG MAGIC CHEF range (gas)

  • Control Panel
    3 Results
  • Body
    3 Results
  • Gas Controls
    3 Results
  • Door
    3 Results

Question and Answers


I have a Kenmore washer mdl # 110.2202100 that spins slow and does not drain all the water. Pump is clear. Speed doesnt cg from slow to fast speed.


The model number that you submitted does not appear to be correct. I recommend that you recheck it. Without an accurate model number, it is difficult to provide accurate troubleshooting and repair information for your washer.

Based on the basic type of washer that you are describing, it sounds like the motor is running in the spin model but is not running at high speed. This could be caused by a wiring failure, motor switch problem, failed drive motor or a timer problem. A technician will normally need to diagnose and repair this type of failure since it would normally require live voltage checks to be performed while the motor is running in the spin mode. If you resubmit your question with the full model number of your washer (after rechecking it) we will likely be able to provide some safe checks that you can conduct yourself in order to try and fix this failure.

Read More
Lyle W -
Sears Technician
May 12, 2010