Model #315228390 Craftsman table saw

  • Miter Gage
    3 Results
  • Switch Housing
    3 Results
  • Rip Fence
    3 Results
  • Blade Guard
    3 Results
  • Base
    3 Results
  • Motor
    3 Results
  • Stand
    3 Results
  • Extension Table
    3 Results
  • Blade
    3 Results

Question and Answers

Q:

Craftsman Table Saw - Model No. 315-228390

A:

Thank you for your question on the arbor and the arbor bearings on the table saw.

These bearing are a tight fit but not a pressed fit. You should not need a press to put them on.

Removing the retainer ring and then you may have to tap on the bearings to get them off.

If the bearing was included and installed onto the arbor shaft as a replacement part it would have been pressed on to the arbor.

I hope this information will help. Sam A.

Read More
Sam A -
Sears Technician
February 08, 2012
Q:

I need an exploded view of the accessory wheel kit for a Craftsman table saw, model 315228390. Can you help? Thanks

A:

We don't have an exploded view of the casters for your table saw. Contact the store where you found the casters.

Read More
Jimmy K -
Sears Technician
July 15, 2009
Q:

My Craftsman table saw, model 315228390, motor starts slow and keeps tripping the circuit breaker!

A:

Try to run the saw on a different circuit breaker than it is running on now. If the motor is still slow to start on a different circuit, the motor is bad.

Read More
Jimmy K -
Sears Technician
June 15, 2009

Top Parts