Model #315220381 Craftsman saw radial

  • Guard
    3 Results
  • Table
    3 Results
  • Stand
    3 Results
  • Base
    3 Results
  • Arm Lock Rod
    3 Results
  • Carriage Cover
    3 Results
  • Motor/blade
    3 Results
  • Handle
    3 Results
  • Anti Kickback Bracket
    3 Results
  • Gearcase
    3 Results
  • Wiring
    3 Results

Question and Answers

Q:

radial saw table dimensions

A:

Thank you for your question on the size of the table on the radial arm saw.

Most of the saws measured from front to back 40 inches wide and 27 inches deep. If you are going to make the table from stock I would recommend use High Density MDF one inch thick.

Actual dimensions of tables: Front table is 40 inches wide by 16 inched deep. Fence is 40 inches wide by 2 3/4 inches X 3/4 thick. Rear board 1 is 40 inches wide by 4 inches deep. Rear board 2 is 40 inches wide by 7 inches deep.

I would suggest that you purchase at least the front table because it is true and pre-drilled for the mounting holes and will have the tee nut for the center adjustment on the frame. The fence you can make out of a 1x3 and cut it to length. The back tables are not so critical unless you plan to do some ripping with the saw and then you have to place change the positions of the fence to cut a maximum of 26 inch rip. Front table for radial arm saw model 315.220381 .

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
November 24, 2012

Top Parts