Model #31-4667-18-03 Tappan ranges, electric

  • Cover
    3 Results
  • Backguard
    3 Results
  • Body Parts
    3 Results
  • Cooktop Parts
    3 Results
  • Broiler Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer Parts
    3 Results

Question and Answers

Q:

e 31

A:

I provided information about that E 31 code in the image below. I recommend that you have a service technician diagnose and repair this type of failure. Here is a link for the Sears Service website: Sears Home Services . There are many wires inside that cook top. Those wires need to be routed properly when the cook top is reassembled after the inside is accessed for service. If you open this cook top on your own, there is a chance that it may not work properly unless it is properly reassembled. If you are completely confident that you can shut off the house circuit breaker to completely disconnect electrical power and access the components, then you may be able to perform the troubleshooting that his shown below for that fault code 31. Be sure that you reassemble the cook top properly. If you need parts, you can order them from the Sears PartsDirect website.

Be sure that you completely disconnect electrical power to the cook top before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 25, 2011
Q:

fault 31 on kenmore oven

A:

Thank you for the update on the ribbon for the touch pads to the electronic oven control.

We will use this as a possibility for future questions with the same issue.

Thank you again for passing this information on to us.

Sam A.

Read More
Sam A -
Sears Technician
August 26, 2011
Q:

Kenmore ultrasoft 180 625.388180 03

A:

Thank you for your question.

I can understand wanting to know what the small brownish orange balls are.

This is the resin beads that do the softening.

What has happened is that the distributor screen down in the bottom of the resin tank has broken and is letting the resin beads out into the water lines.

To repair this you will need to replace this part and it is not a nice job for a consumer because you have to remove the resin bed tank from the softener and then remove the resin and replace the distributor. This tank is full of water and resin beads and it is very heavy.

You will have to remove all the salt from the storage tank first.

Then remove the head off the top of the resin tank.

Then remove the top distributor screen and then you will see the resin.

If it was me doing this I would replace the resin bed also, since you have lost some and you have not cleaned the current bed before.

The part number for the distributor is: 7105047 and it sells for about $62.00.

The part number for the resin is: 0502272 and it sells for about $150.00.

My suggestion is to activate the bypass valve to the softener is not in the water supply line and while you will not have softened water it will stop the resin beads from getting into the water lines.

If you feel like you can do this repair and need more help please reply and I will be happy to help you further.

[Kenmore Water | http://www.kenmorewater.com/website/animations/product-animation/ts_index.html].

I have given you an interactive link to Kenmore Water.com so you can see how the unit works and it includes troubleshooting information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011