Model #31-4667-18-01 TAPPAN Ranges, Electric

  • Cover
    3 Results
  • Backguard
    3 Results
  • Body Parts
    3 Results
  • Cooktop Parts
    3 Results
  • Broiler Parts
    3 Results
  • Door Parts
    3 Results
  • Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

e 31

A:

I provided information about that E 31 code in the image below. I recommend that you have a service technician diagnose and repair this type of failure. Here is a link for the Sears Service website: Sears Home Services . There are many wires inside that cook top. Those wires need to be routed properly when the cook top is reassembled after the inside is accessed for service. If you open this cook top on your own, there is a chance that it may not work properly unless it is properly reassembled. If you are completely confident that you can shut off the house circuit breaker to completely disconnect electrical power and access the components, then you may be able to perform the troubleshooting that his shown below for that fault code 31. Be sure that you reassemble the cook top properly. If you need parts, you can order them from the Sears PartsDirect website.

Be sure that you completely disconnect electrical power to the cook top before accessing internal components and replacing parts.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
November 25, 2011
Q:

fault 31 on kenmore oven

A:

Thank you for the update on the ribbon for the touch pads to the electronic oven control.

We will use this as a possibility for future questions with the same issue.

Thank you again for passing this information on to us.

Sam A.

Read More
Sam A -
Sears Technician
August 26, 2011
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008