Model #3116-01 (130200 - 130299) Briggs & Stratton engine

  • Flywheel Assembly And Blower Housing
    3 Results
  • Replacement Parts
    3 Results
  • Fuel Tank And Carburetor Assembly
    3 Results

Question and Answers

Q:

Singer Simple 3116 install problem.

A:

You can try to free up that handwheel by moving it back and forth. You may need to check that needle to see if it is bent or damaged. Recheck that threading. I assume that you have the owner's manual to refer to. If not, here is a copy of that manual: Owner's Manual . If the handwheel is jammed and will not turn backwards at all, then you will probably need to have the sewing machine serviced by a technician. You can visit this website for information on drop-off locations and repair labor pricing. Many locations have a flat rate labor fee of $62.99 for sewing machines. Parts would be extra if needed.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 25, 2012
Q:

manual on rebuilding sewing machine

A:

Thank you for your question.

  • There is a Service Manual available. But unless unless you are a Singer dealer or service provider you cannot purchase or get the manual from Singer.

  • If you are referring to the shuttle race gears and lower shaft half gear, I can help with some procedures. If you could get back to us, with the specific location of the shaft and gears,I think that I am the only one doing sewing machine questions right now, and so I should get your inquiry back.

Read More
Sam A -
Sears Technician
August 09, 2010
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008