Model #31006 KENMORE Water heater, Electric

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers


table saw fence


Making use of all parts available can be helpful. I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life. While you are waiting for an expert to respond, I have attached a helpful link below if any additional parts are needed.

Read More
Barbara H. -
January 14, 2012

Thank you for your question on the upgraded fence for the table saw.

You would need to purchase the fence and the front and back rails and some hardware and perhaps drill some different mounting holes.

This fence you are referring to is very close to the Beisemeyer 78200 model fence system.

Depending on the width of cut to the right of the blade you could use a BC 30 or a BC50 fence kit to upgrade your saw.

BC30 fence kit .

BC50 fence kit .

You could update your saw with the hybrid fence from the Sears model 351.221160 but ordering a series of parts.

31023.00 RIP FENCE 1 175.66 175.66 351221160 FIDEL 31006.00 RAIL,REAR 1 56.49 56.49 351221160 FIDEL 31005.00 SCALE,RT 1 4.99 4.99 351221160 FIDEL 30983.00 RAIL,FRONT 1 72.99 72.99 351221160 FIDEL 31003.00 CAP 1 2.16 2.16 351221160 FIDEL This parts along with some local purchased hardware will upgrade you to the new fence.

I hope this will help.

Sam A.

Read More
Sam A -
Sears Technician
January 17, 2012
See more answers