Model #30-4987-08-06 TAPPAN range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Drawer Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Door Parts
    3 Results
  • Body Parts
    3 Results

Question and Answers

Q:

Vacuum problem. Bought 02/06/08

A:

Thank you for your question.

I can sure understand your concern as to why you need to hold the hose and handle together to get the Power Mate to work.

• The problem you are having if I understand your description correctly is that the wire connection where the hose meets the handle is not making a good connection all the time.

• There are two other connections that are possible depending on where you are putting the pressure.

• If you are just pushing down on the handle the plug in connections where the lower wand plugs into the Power Mate is one possibility. The other location is where the upper wand plugs into the hose handle assembly.

• If you are pushing on where the hose goes into the handle then it is probably is a broken wire in the hose.

• The wire coils on the hose is what carries the electricity from the vacuum canister to the handle switch and then down the wands to the Power Mate.

• If you can isolate the bad connection to be sure that you are going to be replacing the correct part.

• If it is the hose wires I will give you some pictorial instructions as to how to replace the hose assembly below.

• If it is in the handle harness plug you will need to take the handle apart and replace the handle harness.

• The handle has recessed screws that hold the handle together and one hidden screw at the back of the hand hole to hold the switch cover on.

• The wand wire harness can only be changed with a replacement lower wand.

• If the bad connection is in the Power Mate connection plug you will need to disassemble the Power Mate to replace that harness.

If you have Isolated the problem area please use the link to get more detailed instructions on how to repair.

I hope this will help with your vacuum cleaner.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
November 05, 2010
Q:

Kenmore Washer dryer combo model #?

A:

Thank you for your question and I understand your concern.

You can view the parts diagram and look up parts and order them at SearsPartsDirect .

Here is the link to the Owner's Guide and a link to the Operating Instructions .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 11, 2011
Q:

Snow blade for '06 DYT4000?

A:

Thank you for your question.

I will be happy to assist you. I searched through our fit up books. The only model snow blade I show for your tractor is model 486.24441. The models you listed for older tractors with different frames.

I hope this is helpful. Please let me know if you need further assistance on the air compressor.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
December 06, 2012