Model #30-4979-08-01 Tappan range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Drawer Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Door Parts
    3 Results
  • Body Parts
    3 Results

Question and Answers

Q:

KENMORE ELETE CATALYST WASHER MODEL # 110.2009691 BOUGHT 01/30/2000

A:

That model number appears to be slightly off. That may be why you were not able to access the manual. The model number is probably 110.20096991. Here is a link for that manual: Kenmore Elite Catalyst Washer 110.20096991 Owner's Manual .

Your spin failure could be caused by problem with the clutch or the basket drive. Since you indicated that the washer agitates, the motor drive coupler is probably okay. If you are not positive that the agitator is moving in the agitate mode (even though the motor is running in the agitation mode) then I recommend that you check that issue. If the agitator does not move and the basket does not spin, then that motor coupler is probably broken. Here is a video that shows how to replace that motor coupler. You can order that part from this page: Kenmore Elite Catalyst Washer 110.20096991 Motor Coupler . Be sure that you unplug the washer before accessing internal components.

If the agitiator is moving properly, then you may need to access and check the clutch assembly. Here is a video that shows how to access and replace the clutch assembly. You can order a clutch kit from this page: Complete Clutch Assembly for Kenmore Elite Catalyst Washer 110.20096991 .

A failure in the transmission or the basket drive could also prevent the washer from spinning even though it would agitate.

These initial tips may help you resolve this spin failure in your washer. If you need more assistance, reply with additional details.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
June 22, 2012
Q:

Can't turn off DEMO mode on Bosch gas oven

A:

I am glad to hear that you were able to disable the Demo mode on your Bosch gas range using the instructions provided by Barbara H. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
October 04, 2010
Q:

Follow up to "no spin problem" WFMC2100UC/01

A:

After the installation, the E:04 indicates "Door control broken". The E:20 indicates "Spinning aborted due to unbalanced load". The d:08 indicats "motor speed sensor failed." The d:10 indicates "Power limiter switch tripped." The E:09 indicates that communication was lost to the motor. 

I recommend that you have a service technician examine and repair this washer.

If you want to continue to troubleshoot the problem yourself, I recommend that you check the wire harnesses for damage and connection problems first. You may also have a defective speed sensor, bad control module or failed motor control.

If you need further assistance, let us know.

Thanks for choosing Sears PartsDirect.

Read More
Lyle W -
Sears Technician
March 23, 2015