Model #303 GRINDER Rival kitchen equipment

  • Replacement Parts
    3 Results

Question and Answers

Q:

Why won't my grinder model 397.19451 start?

A:

I don't have technical information on this grinder beyond the parts list diagram. The parts list diagram in our system shows a wiring diagram but it is not readable. I don't have resistance values for the coils. Your symptoms point to a motor problem. The motor parts do not appear to be available. You will likely need to replace the grinder.

Read More
Lyle W -
Sears Technician
October 19, 2009
Q:

Bench Grinder Wiring

A:

Thank you for your question.

I can understand wanting to know what the rating is on the capacitor and having a wiring diagram.

I have found the wiring diagram and will post it below.

I did find the capacitor in the parts break down part number 31919063035 but it is no longer available with no substitute given,and it does not give me the rating.

If you have the old capacitor the rating should be listed on the side of it.

If you do not have the capacitor I am sorry that I cannot help you.

You might try a local electric motor shop in your area to see what MFD they would recommend.

If you have that information off the side of the capacitor please reply and I will try to find one for you.

I hope this has been of some help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 07, 2011
Q:

Parts diagram for grinder

A:

Thank you for your question.

I am sorry you are having a problem getting the correct part. I called the manufacture and they state the correct part number for the gear kit is 5140046-43. You can order the part from our parts website: Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
July 19, 2011