Model #30-3988-23-03 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Door Parts
    3 Results
  • Cooktop Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Body Parts
    3 Results
  • Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

We purchased a 30" gas freestanding LG double oven which was delivered on 2/23/13.

A:

I am not aware of any problems or common issues with that model of LG double oven. You are probably correct about the noise being caused by metal contracting. Since the oven is brand new, you may consider having a service technician examine it. The technician can check for any potential problems while the oven is still under warranty.

Read More
Lyle W -
Sears Technician
April 24, 2013
A:

Based on your description, I recommend that you have a service technician examine the range under the warranty. Based on that recommendation, you should not be charged for service if the technician finds that the noise is normal and nothing is wrong. Let the phone agent know that we recommended the service call and the will set up the warranty service. You should not have to worry that you will be charged anything based on my recommendation. If you need more help, let me know.

Read More
Lyle W -
Sears Technician
April 24, 2013
See more answers
Q:

Expert Joey S.. I looked up parts number .. doesnt existed

A:

Thank you for your question and I understand your concern.

I double checked the part number of the Bake ignitor (5303935066) and it is a good part number. You can order from SearsPartsDirect . Click on the link and will take you to directly to the page. It will list 4 of the same part numbers. It will be a universal ignitor that will fit many different models.

Read More
Joey S -
Sears Technician
July 27, 2011
Q:

Kenmore ultrasoft 180 625.388180 03

A:

Thank you for your question.

I can understand wanting to know what the small brownish orange balls are.

This is the resin beads that do the softening.

What has happened is that the distributor screen down in the bottom of the resin tank has broken and is letting the resin beads out into the water lines.

To repair this you will need to replace this part and it is not a nice job for a consumer because you have to remove the resin bed tank from the softener and then remove the resin and replace the distributor. This tank is full of water and resin beads and it is very heavy.

You will have to remove all the salt from the storage tank first.

Then remove the head off the top of the resin tank.

Then remove the top distributor screen and then you will see the resin.

If it was me doing this I would replace the resin bed also, since you have lost some and you have not cleaned the current bed before.

The part number for the distributor is: 7105047 and it sells for about $62.00.

The part number for the resin is: 0502272 and it sells for about $150.00.

My suggestion is to activate the bypass valve to the softener is not in the water supply line and while you will not have softened water it will stop the resin beads from getting into the water lines.

If you feel like you can do this repair and need more help please reply and I will be happy to help you further.

[Kenmore Water | http://www.kenmorewater.com/website/animations/product-animation/ts_index.html].

I have given you an interactive link to Kenmore Water.com so you can see how the unit works and it includes troubleshooting information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 13, 2011