Model #30-2538-66-02 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Body Parts
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Door Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

remington22lr model 66

A:

I see that Marc posted a link in the above response for the page on the Remington website that has the Owner's Manual links. That should help you find the manual for the Remington Model 66 rifle.

Read More
Lyle W -
Sears Technician
December 26, 2012
Q:

my ignitor has 66 omhs instead of 40 omhs is this a problem

A:

Thank you for your question.

I can understand wanting the information on the igniter.

Yes, I would change the igniter if the ohms are that far off. It needs to be real close to 40 ohms or it will not get hot enough satisfy the sensor and open the gas valves.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 10, 2010
Q:

Why is my timer hard to turn?

A:

The washer timer knob assembly and timer will most likely need to be replaced since the alignment pin corroded off.

The timer knob (key#30) should thread ON and OFF of the threaded timer shaft. Over time and use, the timer can become hard to rotate and eventually cause the timer knob assembly to break or the alignment pin.

I recommend calling a service technician to diagnose and repair your washer.

Read More
Joey S -
Sears Technician