Model #30-2118-66-03 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Door Parts
    3 Results
  • Burner Parts
    3 Results
  • Body Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

remington22lr model 66

A:

I see that Marc posted a link in the above response for the page on the Remington website that has the Owner's Manual links. That should help you find the manual for the Remington Model 66 rifle.

Read More
Lyle W -
Sears Technician
December 26, 2012
Q:

my ignitor has 66 omhs instead of 40 omhs is this a problem

A:

Thank you for your question.

I can understand wanting the information on the igniter.

Yes, I would change the igniter if the ohms are that far off. It needs to be real close to 40 ohms or it will not get hot enough satisfy the sensor and open the gas valves.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
December 10, 2010
Q:

My power went out and I was using my Kenmore top loading washing machine. When power came back on I cannot get it open the lid locked light is blinking.

A:

Check for other blinking lights on the control along with that lock light blinking. The status lights beside the control will blink lights in a pattern if the control detects a problem with a component in the washer.

Try unplugging the washer for 5 minutes and then plugging it back in may reset the control. After plugging the washer back in, try to cancel the cycle.

If the washer still won't work and it is under warranty, I recommend that you call Sears at 1-800-469-4663 (1-800-4MY-HOME) to talk to a technical specialist and schedule service if necessary.

If the washer is not still under warranty, reply with additional details (any other lights lit or blinking on the control). We will assist you further once we receive more information.

Read More
Lyle W -
Sears Technician
May 31, 2011