Model #30-1049-23-07 TAPPAN Range (gas)

  • Cover Page
    3 Results
  • Backguard
    3 Results
  • Cooktop Parts
    3 Results
  • Broiler Drawer Parts
    3 Results
  • Door Parts
    3 Results
  • Burner, Manifold And Gas Control
    3 Results
  • Body Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Electric dryer model 11062884101 heating element not working have replaced part #3403585 on 3/23/07. Repairman said it is unusual to have to replac

A:

Hi Charles,

Thank you for submitting a question to Manage My Life.

The first link above is to one of my answers on this type of dryer. Follow my troubleshooting in this link; What can cause my electric dryer to not heat after replacing the heating element? it will guide you through the first things you will need to check.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website; Sears Home Services .

Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance; Sears Parts Direct .

I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post with details of what you find.

Landell

Read More
Landell -
Sears Technician
April 24, 2012
Q:

We purchased a 30" gas freestanding LG double oven which was delivered on 2/23/13.

A:

I am not aware of any problems or common issues with that model of LG double oven. You are probably correct about the noise being caused by metal contracting. Since the oven is brand new, you may consider having a service technician examine it. The technician can check for any potential problems while the oven is still under warranty.

Read More
Lyle W -
Sears Technician
April 24, 2013
A:

Based on your description, I recommend that you have a service technician examine the range under the warranty. Based on that recommendation, you should not be charged for service if the technician finds that the noise is normal and nothing is wrong. Let the phone agent know that we recommended the service call and the will set up the warranty service. You should not have to worry that you will be charged anything based on my recommendation. If you need more help, let me know.

Read More
Lyle W -
Sears Technician
April 24, 2013
See more answers
Q:

Dyson DC 07 vacuum

A:

Thank you for your request for the handle release.

There has been an update to this part from Dyson

You will need to order either 908821-01 if a clutched drive assembly or 908822-01 for a clutch less model.

You can order this part from: Sears Parts Direct .

Lock .

I hope this will help.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 18, 2011