Model #2F25 SHARP Misc Television

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers


Whirlpool Cabrio Steam Dryer WED6600VW bought new won't run after 1 1/2 years with F2 and F25 Code


I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Jackie S -
December 16, 2011

Thanks Jackie. Looking forward to some help.

Read More
Robin -
December 16, 2011

I know that it can be very frustrating to have these problems with the dryer. The AF error is a restriction in the air flow, and you did a good job by checking the vent. I would also suggest that you clean all the lint out of the machine as well.

The F2 error code is a problem with the user interface. Since you did the testing on page 8 of the tech sheet, and it still did not work then you will need to replace the user interface assembly.

The F25 error code will be the easiest one for you to fix. On page 6 of the tech sheet it shows you how to test the inlet thermistor, and on page 9 it shows you how to disassemble the machine. This is a common part to replace, so it is something you can do. Once you access the machine, take a picture of the thermistor. This is so you will know where the wiring needs to go on the new one. The thermostior is held in with a regular screw, so you won't need any special tools.

I would recommend that you have a technician do the diagnosis and repair. If you would like to schedule service place click on this link. Sears Home Services

If you need any further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
December 19, 2011
See more answers