Model #295 TYPE 4 Poulan chainsaw, gas

  • Chassis/shield/crankshaft
    3 Results
  • Chassis/bar/handle
    3 Results
  • Carburetor
    3 Results
  • Service Reference
    3 Results

Question and Answers

Q:

What type of oil does the Craftsman 4 gallon air compressor use?

A:

The model number of 16638 is not recognized by our systems. The closest I could get to your model is 166300. This model is an oil-less compressor and requires no oil.

Read More
Jimmy K -
Sears Technician
February 20, 2009
Q:

Craftsman Sears 4 cylinder tank type paint sprayermodel #106152740-Compressor Oil 106152740 Craftsman Sears 4 cylinder tank type paint sprayer

A:

We could not find a manual for that older paint sprayer compressor. It was manufactured around 1967 by Campbell Hausfeld for Craftsman. The Campbell Hausfeld compressor usually use SAE-30 motor oil in that type of compressor.

Read More
Lyle W -
Sears Technician
April 21, 2014
A:

We could not find a manual for that older paint sprayer compressor. It was manufactured around 1967 by Campbell Hausfeld for Craftsman. The Campbell Hausfeld compressors usually use SAE-30 motor oil in that type of compressor.

Read More
Lyle W -
Sears Technician
April 21, 2014
See more answers
Q:

Kenmore oven is slow to heat up and only gets up to 295 degrees.

A:

This oven has a hidden bake element. I recommend that you pull the bottom panel out of the oven cavity and check to see if that bake element is heating. The bake element will alternate with the broil element in the bake mode. If that element is not heating properly, it will need to be replaced. You can order parts from the Sears PartsDirect website.

If the bake element appears to be working properly, I recommend that you verify the operation of the broil element. Start the oven in the broil mode and check to make sure that broil element is heating properly.

If you find no problems with the elements, I recommend that you check the oven temperature sensor probe. Here is a video that shows how to test that component using a volt/ohm meter: Oven Sensor Testing . Here is a link that shows how to access the sensor: Range Oven Sensor Replacement . Be sure that you unplug the range before accessing internal components . If the sensor is okay (measures around 1100 ohms at room temperature), then you could have a problem with the electronic oven control board. The part number for that control board (also called clock/control) is 316462807. Unplug the range before accessing this component.

These tips may help you with this range failure. If you need more assistance, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
May 17, 2011