Model #286707-0122-01 Briggs & Stratton engine

  • Replacement Parts
    3 Results
  • Carburetor And Air Cleaner Assembly
    3 Results
  • Motor And Drive Assembly
    3 Results

Question and Answers

Q:

I'm trying to find a starter for a Craftsman riding lawn mower model 917.255520. Can you direct me?

A:

309 499521 Add to pick list Motor-Starter (4 3/8" Housing Length) 309 693551 Add to pick list Motor-Starter (3 5/8" Housing Length For Steel Ring Gear Only) 309 693552 Add to pick list Motor-Starter (4-3/8" Housing Length For Steel Ring Gear Only) 309 497595 Add to pick list Motor-Starter (3 5/8" Housing Length) I am sending you the information needed to choose which starter goes on your engine. This engine used 4 different starters while it was being manufactured.

You will need to remove the starter from the engine and check to see if the ring gear on the flywheel is steel or graphite. Measure the housing length on the old starter and choose the one you need.

Read More
Jimmy K -
Sears Technician
March 23, 2009
Q:

What does error code 01 indicate on my HE3?

A:

With out the model number or description of the product I do not know if you are referring to your HE3 washer or HE3 dryer. Based on the Dryer listed in your home profile the 01 code is not listed. The error codes on the dryer will display as "E1, E2, and E3"

There are no error codes 01 for the HE3 dryers or HE3 washers.

The 01 is not an error code.

Resubmit your question with the model number and details for specific information.

Read More
Joey S -
Sears Technician
April 11, 2008
Q:

LG Model #LDS5811ST/01

A:

Check the child lock function to make sure that function is not enabled as shown in the first image below. You did not indicate the error code that you are seeing on the dishwasher. The second and third images show the error codes for this type of dishwasher. If you see one of these error codes, you may be able to perform some of the troubleshooting shown in those images. Be sure that you shut off the circuit breaker for the dishwasher to completely disconnect electrical power before accessing internal components. If you need more help, reply with additional details (error code being displayed) and we will try to assist you further.

Read More
Lyle W -
Sears Technician
March 07, 2011