Model #2800 Hoover attachments (vacuum)

  • Baghousing, Motorhousing
    3 Results
  • Hose, Cleaningtools
    3 Results
  • Motor Assembly
    3 Results

Question and Answers

Q:

kenmore 2800

A:

Thank you for submitting a question to Manage My Life.

The manufacturer of "WHITE BRITE" (FORMERLY YELLOW OUT), Summit Brands, 7201 Engle Rd. Fort Wayne, IN 46804, 1-888-476-6688, state on their website that this product is safe for all washable fabrics but they do not mention whether or not it is safe for all washing machines. I am unaware of any reasons that it would be contraindicated for use in HE washing machines. WHITE BRITE is safe on all washable white & colorfast fabrics including delicates, cotton, silk, wool and synthetics.WHITE BRITE can be used along with your regular detergent. Summit brands does warn, "Do not use with bleach or peroxide". For further information on their product, I recommend that you contact Kristin Eby, Quality and Environmental Systems Specialist for Summit Brands at 1-260-483-2519 ext. 229.

I hope this is helpful. If I may be of further assistance please reply to this post.

Landell

Read More
Landell -
Sears Technician
January 10, 2012
Q:

Kenmore 2800 not "sensing"

A:

Since the washer is brand new and under the manufacturer's warranty, I do not recommend that you attempt to place the washer control in the diagnostic test mode. I recommend that you check these issues:

  • Make sure that you have the hot and cold water fill lines connected properly.

  • Check the water supply faucets behind the washer. They should be fully open.

  • Check the installation guide for the washer to make sure that you followed all of the steps properly.

If the washer is properly installed and has an adequate water supply, then I recommend that you call Sears at 1-800-469-4663 (1-800-4MY-HOME) for service. The service agent at that phone number may check some other issues with the washer and then will likely schedule service by a technician.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
March 30, 2011
Q:

Kenmore 2800 not "sensing"

A:

Since the washer is brand new and under the manufacturer's warranty, I do not recommend that you attempt to place the washer control in the diagnostic test mode. I recommend that you check these issues:

  • Make sure that you have the hot and cold water fill lines connected properly.

  • Check the water supply faucets behind the washer. They should be fully open.

  • Check the installation guide for the washer to make sure that you followed all of the steps properly.

If the washer is properly installed and has an adequate water supply, then I recommend that you call Sears at 1-800-469-4663 (1-800-4MY-HOME) for service. The service agent at that phone number may check some other issues with the washer and then will likely schedule service by a technician.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
March 30, 2011