Model #25361832100 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


How to change the door seal on my Kenmore refrigerator model number 25361832100?


The easiest way to replace the door gasket on this model is, to remove the door and lay it down. First turn the unit off or disconnect power from it. Take the top hinge loose and the freezer door can be lifted and removed. The center hinge has to be taken off, to remove the refrigerator door. Now lift the lip of the gasket and remove the screws, all the way around the door. With the screws out, the inner panel and gasket will be loose. Slide the gasket off but pay attention, how it fits on the panel. Now slide the new gasket on and line the screw holes up with the holes in the panel. Put the screws back in but don't tighten them down, until all of them are in place. Install the door back in place and you will probably find the door is bowed now. Pop the door back in place and if there are any gaps in the gasket, use a hair dryer to heat and soften it. Be careful not to get the gasket too hot. This can be a tricky job even for a technician. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
November 18, 2009

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show