Model #25344509600 Kenmore Elite side-by-side refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results

Question and Answers

Q:

the ribbon harness came off the control board on my kenmore elite refrigerator how do i put it back on and where, it was taped on ?

A:

I don't have an exact picture to send you on this repair. The image below shows the ribbon cable between the user interface board and the power board on a similar model. The ribbon cable should plug into the power control board on the back. You may need to remove screws from the front of the board to access the back and find the connector that the ribbon cable plugs into. Be sure that you have the refrigerator unplugged when accessing the internal components. Once you access the back of the control board, you should find a connection like the one shown in the image below where the ribbon cable pushes into a slot on the board.

Read More
Lyle W -
Sears Technician
August 27, 2010