Model #247881730 Craftsman snowthrower, gas

  • Auger & Housing
    3 Results
  • Handle Panel/chute
    3 Results
  • Wheel/engine/gear
    3 Results
  • Decals
    3 Results

Question and Answers

Q:

Auger belt noise (Bad) 247881730 Craftsman Snow thrower

A:

Here is a link for a Sears PartsDirect Repair Guide that shows how to replace the auger belt: How to Replace a Snowblower Auger Belt.

I recommend that you check the belt to see if it is installed properly. 

The correct part number for the auger drive belt is 954-04050.

You may also consider having the snow thrower serviced under the warranty since it is brand new.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
February 04, 2014
Q:

Snow Blower ?Gas shut off,Does it have one

A:

Thank you for your question.

 

 

I also want to thank you for choosing Sears when it was time to purchase a snow blower. I am sure you will get years of use out of it. The new snow blowers do not have a fuel shut off valve. The reason is the needles and seats seal better than they used too. The most important thing you can do to ensure trouble free use out of the snow blower is to use fuel stabilizer in all the fuel you put into the tank. This will keep the fuel from gumming up the carburetor. I also recommend spraying down the unit with WD-40 before you store it. This will prevent the metal housing from rusting.

 

 

I hope this is helpful. If you need further assistance, please reply below with more details.

 

 

Thank you for using Manage my life.

Mark 

Read More
Mark T -
Sears Technician
September 12, 2013