Model #24777640-2009 Craftsman log splitter

  • Log Splitter
    3 Results
  • Decals
    3 Results

Question and Answers

Q:

How do I remove the hub cap on a sears Craftsman log splitter, model 24777640.

A:

Thank you for your question.

I am sorry you are having a problem with removing the hubcap. I use a hammer and straight blade screwdriver to remove the hubcap. Work a small screwdriver between the hub and the hubcap. Once the screwdriver is in place, tap the end of the screwdriver with the hammer to drive the hubcap out of the hub. If you have a problem getting a screwdriver into position you can use a pair of slip join pliers to grip the hubcap. Once you have grip on the cap pull out and wiggle it up and down.

I hope this is helpful.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
September 03, 2011
Q:

Is my new dishwasher under warranty if the unit was purchased January 6, 2009?

A:

Since you indicate the dishwasher was purchased January 6 of 2009 it should be covered under the manufactures warranty if it is installed and operated according to installation instructions and Use and Care Guide.

Read More
Joey S -
Sears Technician
February 23, 2009
Q:

What is the transformer output for a Prime Fit 2009 PMR Stepper?

A:

Without a model number I can only give you general information on the stepper.

Most steppers use a 6 volt dc power supply, around 30-40 mv. The input and output voltage are stamped on the power supply. If you have the old power supply, you can get the information from it.

Read More
Jimmy K -
Sears Technician
March 29, 2010