Model #2375LE TYPE 2 Poulan chainsaw, gas

  • Chassis/bar/handle
    3 Results
  • Shield/cylinder/crankshaft
    3 Results
  • Carburetor (wt600) #530071410
    3 Results

Question and Answers

Q:

Poulan Wild Thing Chain Saw Fuel Lines 2375LE TYPE 2 Poulan Chain saw - wildthing

A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 27, 2013
A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 27, 2013
A:

Here is the image.

Read More
Mark T -
Sears Technician
January 27, 2013
See more answers
Q:

What type oil is used in a Craftsman rear tine tiller engine and gear box? There are 2 oil plugs.

A:

Both oil plugs are for the engine. Engines that are used in tillers are used for a number of applications. The oil plugs are placed in more than one place on the engine so if one plug is not accessible the other will be.

The engine uses 30 weight motor oil. The transmission on your tiller doesn't have oil in it. It has axle grease and never needs changing.

Read More
Jimmy K -
Sears Technician
Q:

Whirpool Dryer(Model#LER7646EQ2; Type #178-00) is taking multiple cycles(2 or more) to dry clothes on the HIGH (Cotton) settings.

A:

Based on your symptom if the dryer is taking 2 or more cycles to dry the clothes usually indicates a restriction in the vent system. The dryer could also have a bad door seal, drum seal or the lint filter screen could be covered in a clear film of fabric softener residue too. Take the lint filter out and wash it with a soft bristle brush and warm soapy water. If the door seal and the front and rear drum seals are okay then the venting system is likely at fault. In order to know if the venting system is at fault, disconnect the vent hose from the back of the dryer and dry one load of clothes. The exhaust temperature should average 150 degrees when set on High heat. If the clothes dry in a normal amount of time then the venting system will need to be checked for any kinks, restrictions or blockages. If the clothes still takes 2 or more cycles to dry then the heating element will need to be removed and checked for any breaks in the element where it will likely be touching and welded to the housing.

Read More
Joey S -
Sears Technician
April 26, 2010