Model #2375LE TYPE 1 Poulan chainsaw, gas

  • Chassis/bar/handle
    3 Results
  • Shield/cylinder/crankshaft
    3 Results
  • Carburetor (wt600) #530071410
    3 Results

Question and Answers

Q:

Poulan Wild Thing Chain Saw Fuel Lines 2375LE TYPE 2 Poulan Chain saw - wildthing

A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 27, 2013
A:

Thank you for your question.

I am sorry you are having a problem with the chainsaw. We do not have any written instructions for replacing the fuel line on chainsaws but I will try to help you. First, remove the air filter cover and the air filter. Then draw a diagram of how the fuel line is routed. I have also provided you with an image below showing the fuel line circuit. Then remove the all of the old fuel lines from the saw. When you are ready to reinstall the line cut one end so that it is tapered about an inch up. This will give you something to stick into the hole of the tank. Once in the hole reach into the tank with long forceps and grab the line and pull it through. Once you have it pulled in cut the pointed end off and install the filter. The line should be long enough so the fuel filter is on the bottom of the fuel tank. Then do the same for the return line. The only difference is the return line only has to be sticking in the tank about a half an inch.

I have found a few videos that I think might help you. Please click here to watch the first video . Then click here to watch the second video.

If you need further assistance, please feel free to reply below with more details.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Here is a link to order any parts you need. Sears Parts Direct .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 27, 2013
A:

Here is the image.

Read More
Mark T -
Sears Technician
January 27, 2013
See more answers
Q:

3 in 1 Lawn Tractor blade type

A:

Thank you for your question.

The 3 in 1 blade is used for mulching, bagging, and side discharge. We have used this blade for years and it work good for all 3.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 15, 2012
Q:

Type 1 conversion kit / parts list Model# 790.74403995

A:

A qualified installer should convert this range back to natural gas. The LP conversion kit instructions normally have information on the how to convert the range back to natural gas from propane. I do not have a copy of those instructions. I will try to get those instructions from the manufacturer. Once I receive those instructions, I should be able to provide the installer with some assistance in converting this range back to natural gas.

I will update this thread as soon as I receive the LP conversion kit instructions from the manufacturer.

Read More
Lyle W -
Sears Technician
November 30, 2011
A:

Hello David. I just received the LP conversion kit instructions from the manufacturer. Those LP conversion kit instructions included a section for converting the range back to natural gas. The first 3 pages shown below have the information for converting this range back to natural gas. The instructions show the sizes of the orifices that are needed for that natural gas conversion. I do not see those individual orifices listed through the parts diagram on our Sears PartsDirect.com website. I recommend that you check with your gas company or a local appliance parts supplier in your local area to obtain those natural gas orifices (unless you can find the ones that were originally installed in the range). In the 4th image below, I provided the sizes of Propane (LP) orifices that were installed during the conversion. That information should help you with the configuration of the natural gas orifices on the burners. I hope that this information will help your installer properly convert this range. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
December 01, 2011
A:

Here is the 4th image that shows the LP (Propane) orifices that were used on the conversion.

Read More
Lyle W -
Sears Technician
December 01, 2011
See more answers